Engineered for optimal performance, this polycarbonate deep groove ball bearing offers a lightweight, non-conductive solution. Its robust design ensures reliable operation in corrosive environments and high-speed applications within the power transmission sector.
| Standard | ASTM A106 |
| Material | Polycarbonate |
| Finish | Zinc Plated |
| Grade | N/A |
| Inside Diameter | 40mm |
| Outside Diameter | 90mm |
| Width | 26mm |
Precision-manufactured to tight tolerances, this deep groove ball bearing features an inside diameter of 40mm, an outside diameter of 90mm, and a width of 26mm. Constructed from high-grade polycarbonate, it exhibits excellent chemical resistance, low friction, and electrical insulation properties, making it ideal for applications where metallic bearings are unsuitable due to corrosion or electrical conductivity requirements. Its lightweight nature contributes to reduced rotational inertia, enhancing efficiency in power transmission systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the bearing housing and shaft are clean and free from debris. 2. Carefully press the bearing onto the shaft, ensuring it is seated squarely. 3. Gently mount the bearing assembly into the housing, applying even pressure.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Forcing the bearing onto an improperly prepared shaft or housing. | Always ensure shafts and housings are clean, within specified tolerances, and properly chamfered to prevent damage during installation. |
| Using excessive force or impact during mounting, which can damage the polycarbonate raceways. | Utilize a calibrated press or appropriate bearing installation tools for controlled, even pressure application. |
A: This Deep Groove Ball Bearing is manufactured from Polycarbonate.
A: Conveyor systems, Electric motor assemblies, Pumps and fluid handling equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||