This Deep Groove Ball Bearing, constructed from robust polycarbonate, offers a lightweight and corrosion-resistant solution for power transmission. Its precise design ensures smooth operation and longevity in demanding environments.
| Standard | DIN 933 |
| Material | Polycarbonate |
| Finish | Galvanized |
| Grade | N/A |
| Inside Diameter | 40mm |
| Outside Diameter | 48mm |
| Width | 34mm |
Built to exacting engineering tolerances, this polycarbonate deep groove ball bearing features an inside diameter of 40mm, an outside diameter of 48mm, and a width of 34mm. The inherent properties of polycarbonate provide excellent electrical insulation, chemical resistance, and a significantly lower weight compared to traditional steel bearings. This makes it ideal for applications where weight reduction, non-conductivity, or resistance to specific corrosive agents are critical factors. Its design accommodates moderate radial and axial loads, ensuring efficient power transfer in a variety of industrial settings.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating shaft and housing surfaces are clean and free from debris. 2. Carefully align the bearing with the shaft, applying gentle, even pressure for insertion. 3. Secure the bearing in its housing according to the specific equipment design, ensuring no excessive force is applied to the bearing rings.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening during installation, leading to premature wear or deformation of the polycarbonate races. | Apply only the required mounting pressure, adhering to the equipment manufacturer's specifications for bearing installation. |
| Exposure to operating temperatures exceeding the polycarbonate's thermal limits, causing material degradation. | Verify that the operating temperature range of the application is within the specified limits for polycarbonate bearings. |
A: This Deep Groove Ball Bearing is manufactured from Polycarbonate.
A: Lightweight machinery components, Corrosive chemical processing equipment, Electrical insulation applications.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||