Engineered for demanding environments, this polycarbonate deep groove ball bearing offers exceptional corrosion resistance and lightweight design. Its precise dimensions ensure reliable, low-friction power transmission in a variety of applications.
| Standard | ASTM A106 |
| Material | Polycarbonate |
| Finish | Passivated |
| Grade | N/A |
| Inside Diameter | 37mm |
| Outside Diameter | 100mm |
| Width | 40mm |
Trusted by engineers across multiple sectors, this deep groove ball bearing boasts a 37mm inside diameter, 100mm outside diameter, and a 40mm width. Constructed from advanced polycarbonate, it exhibits superior chemical inertness, excellent electrical insulation properties, and a significantly lower density compared to traditional steel bearings. This makes it an ideal choice for applications in chemically aggressive or electrically sensitive environments where weight reduction is critical. Its robust design ensures smooth operation and extended service life under moderate load conditions.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the bearing housing and shaft are clean and free from contaminants. 2. Carefully press the bearing onto the shaft, applying even force to the inner ring. 3. Gently insert the bearing and shaft assembly into the housing, ensuring proper alignment.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying force to the outer ring during shaft mounting. | Always apply force exclusively to the inner ring when mounting the bearing onto the shaft to prevent brinelling of the raceways. |
| Using excessive lubrication, which can lead to heat buildup. | Apply only the recommended amount of lubricant. Over-lubrication can cause churning and increase operating temperature. |
A: This Deep Groove Ball Bearing is manufactured from Polycarbonate.
A: Chemical Processing Equipment, Food and Beverage Machinery, Marine Applications, Medical Devices.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||