This deep groove ball bearing, constructed from high-performance polycarbonate, offers excellent load-bearing capacity and low friction for efficient power transmission in demanding environments.
| Standard | ASTM A106 |
| Material | Polycarbonate |
| Finish | Passivated |
| Grade | N/A |
| Inside Diameter | 36mm |
| Outside Diameter | 26mm |
| Width | 49mm |
Specified by design engineers worldwide, this deep groove ball bearing boasts an internal diameter of 36mm, an external diameter of 26mm, and a width of 49mm. Its robust polycarbonate construction provides superior corrosion resistance, chemical inertness, and a significantly lower weight compared to traditional steel bearings, making it ideal for applications where weight reduction and non-conductive properties are paramount. This material also offers good thermal insulation and impact resistance, contributing to its longevity in diverse operational conditions.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the bearing housing and shaft are clean and free of debris. 2. Carefully align the bearing with the shaft, applying even pressure to insert it. 3. Once seated, secure the bearing according to the system's design specifications.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying excessive force during installation | Use a bearing press or appropriate tooling to apply even pressure during installation, avoiding direct impact. |
| Contamination of bearing surfaces | Handle bearings in a clean environment and avoid direct contact with hands or tools that may introduce foreign particles. |
A: This Deep Groove Ball Bearing is manufactured from Polycarbonate.
A: High-speed conveyor systems, Electric motor components, Lightweight robotic arms.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||