This high-performance deep groove ball bearing, constructed from advanced polycarbonate, offers exceptional lightweight strength and corrosion resistance. Engineered for reliable power transmission in challenging environments.
| Standard | ASME B18 |
| Material | Polycarbonate |
| Finish | Plain |
| Grade | N/A |
| Inside Diameter | 34mm |
| Outside Diameter | 168mm |
| Width | 47mm |
Trusted by engineers across multiple sectors, this deep groove ball bearing boasts a 34mm inside diameter, a 168mm outside diameter, and a 47mm width. Its advanced polycarbonate construction provides superior chemical resistance and a significantly lower weight compared to traditional steel bearings, making it ideal for applications where corrosion is a concern or weight reduction is critical. The material's inherent dielectric properties also make it suitable for environments with electrical considerations.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting surfaces are clean and free of debris. 2. Carefully align the bearing with the shaft and housing. 3. Apply controlled, even pressure to press the bearing into place, avoiding hammering or excessive force.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying excessive force during installation, leading to brinelling or damage to the polycarbonate raceways. | Use a proper bearing press or installer tool to apply gradual, even pressure. Never strike the bearing directly. |
| Incorrect shaft or housing fit, causing premature wear or bearing failure. | Verify that the shaft and housing dimensions conform to the recommended tolerances for this specific bearing size and material. |
A: This Deep Groove Ball Bearing is manufactured from Polycarbonate.
A: Conveyor systems, Material handling equipment, Corrosion-prone industrial machinery.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||