This deep groove ball bearing features a robust polycarbonate construction, offering exceptional lightweight properties and corrosion resistance. Ideal for demanding power transmission applications where traditional steel bearings may be unsuitable.
| Standard | ASTM A106 |
| Material | Polycarbonate |
| Finish | Anodized |
| Grade | N/A |
| Inside Diameter | 33mm |
| Outside Diameter | 144mm |
| Width | 38mm |
Manufactured under strict quality controls, this deep groove ball bearing boasts a precise 33mm inside diameter, a substantial 144mm outside diameter, and a 38mm width. The advanced polycarbonate material provides excellent dielectric strength, low friction coefficient, and inherent corrosion resistance, making it suitable for environments exposed to moisture or chemicals. Its reduced weight compared to steel bearings also contributes to lower rotational inertia and energy efficiency in rotating systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting surfaces are clean and free of debris. 2. Carefully press the bearing onto the shaft, applying even pressure to the inner ring. 3. Secure the bearing using appropriate retaining methods for the application.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening the bearing during press-fit installation. | Apply gradual, even pressure only to the inner ring to avoid deforming the bearing or damaging the polycarbonate structure. |
| Using excessive force or impact when mounting. | Employ a bearing press or a soft mallet with a protective sleeve to ensure smooth and controlled installation, preventing stress fractures. |
A: This Deep Groove Ball Bearing is manufactured from Polycarbonate.
A: Electric motors, Conveyor systems, Textile machinery.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||