This deep groove ball bearing, constructed from high-performance polycarbonate, offers a lightweight, non-corrosive solution for various power transmission needs. Its inherent electrical insulation and chemical resistance make it ideal for specialized environments.
| Standard | ASME B18 |
| Material | Polycarbonate |
| Finish | Black Oxide |
| Grade | N/A |
| Inside Diameter | 98mm |
| Outside Diameter | 176mm |
| Width | 42mm |
Precision-manufactured to tight tolerances, this polycarbonate deep groove ball bearing features an inside diameter of 98mm, an outside diameter of 176mm, and a width of 42mm. The advanced polycarbonate material provides excellent resistance to a broad range of chemicals and corrosive agents, significantly outperforming traditional steel in such applications. Its low coefficient of friction ensures smooth, efficient rotational performance with minimal energy loss, while its non-conductive properties make it suitable for electrical applications where conductivity is undesirable. This design is optimized for light to moderate load conditions and moderate rotational speeds, offering a durable and reliable bearing solution.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure shaft and housing surfaces are clean and free from debris. 2. Carefully press the bearing onto the shaft, ensuring it is seated squarely. 3. Gently press the housing over the bearing, aligning it with the shaft and housing seat.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying excessive force during press-fitting, leading to brinelling or deformation. | Use a bearing press or a carefully sized drift for even pressure application. Avoid hammering directly on the bearing rings. |
| Incorrect shaft or housing fit, resulting in premature wear or bearing failure. | Verify that the shaft and housing have the recommended clearance or interference fits for polycarbonate bearings to prevent excessive stress. |
A: This Deep Groove Ball Bearing is manufactured from Polycarbonate.
A: Food processing equipment, Chemical handling systems, Medical device assemblies.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||