Engineered for robust power transmission, this polycarbonate deep groove ball bearing offers exceptional corrosion resistance and lightweight performance. Its precision design ensures smooth operation in challenging industrial settings.
| Standard | ASME B18 |
| Material | Polycarbonate |
| Finish | Black Oxide |
| Grade | N/A |
| Inside Diameter | 31mm |
| Outside Diameter | 126mm |
| Width | 19mm |
Designed for demanding industrial environments, this deep groove ball bearing features an inside diameter of 31mm, an outside diameter of 126mm, and a width of 19mm. Constructed from high-grade polycarbonate, it exhibits superior chemical resistance to many solvents and acids, making it suitable for corrosive atmospheres where traditional steel bearings would fail. Its inherent non-conductive properties also make it ideal for applications requiring electrical insulation. The advanced polymer composition provides a low coefficient of friction, reducing energy loss and extending service life in continuous operation scenarios.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the bearing seat is clean and free from debris. 2. Carefully press the bearing into the housing using a suitable arbor press or specialized tooling, ensuring even pressure is applied. 3. Verify smooth rotation after installation; do not force if resistance is met.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying excessive force during installation leading to deformation. | Use a calibrated press and ensure proper alignment to apply even pressure, or utilize a bearing induction heater if appropriate for the size. |
| Using incompatible lubricants that degrade polycarbonate. | Consult the bearing manufacturer's specifications for recommended lubricants; typically, silicone-based or PTFE lubricants are suitable. |
A: This Deep Groove Ball Bearing is manufactured from Polycarbonate.
A: Corrosive Chemical Processing Equipment, Food and Beverage Processing Machinery, Water Treatment and Pumping Systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||