This high-performance deep groove ball bearing features a robust polycarbonate construction, offering excellent corrosion resistance and reduced weight for critical power transmission applications.
| Standard | DIN 933 |
| Material | Polycarbonate |
| Finish | Plain |
| Grade | N/A |
| Inside Diameter | 36mm |
| Outside Diameter | 114mm |
| Width | 45mm |
Manufactured under strict quality controls, this polycarbonate deep groove ball bearing boasts an inside diameter of 36mm, an outside diameter of 114mm, and a width of 45mm. The inherent properties of polycarbonate provide exceptional resistance to many chemicals and environments, making it ideal for applications where traditional steel bearings may corrode or degrade. Its lightweight nature also contributes to reduced system inertia and energy consumption in dynamic power transmission setups.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mounting surfaces are clean and free of debris. 2. Carefully align the bearing with the shaft and housing. 3. Apply appropriate force to seat the bearing, avoiding misalignment.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening during installation, leading to premature wear. | Use a calibrated torque wrench and follow specified seating forces. |
| Introducing contaminants during handling and installation. | Keep the bearing in its original packaging until immediately before installation and work in a clean environment. |
A: This Deep Groove Ball Bearing is manufactured from Polycarbonate.
A: Corrosive chemical processing equipment, Food and beverage machinery, Medical devices requiring non-metallic components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||