This robust deep groove ball bearing, constructed from advanced polycarbonate, offers exceptional performance in power transmission systems. Its lightweight nature and inherent corrosion resistance make it ideal for specialized industrial applications.
| Standard | ASME B18 |
| Material | Polycarbonate |
| Finish | Plain |
| Grade | N/A |
| Inside Diameter | 28mm |
| Outside Diameter | 136mm |
| Width | 36mm |
Precision-manufactured to tight tolerances, this deep groove ball bearing features an inside diameter of 28mm, an outside diameter of 136mm, and a width of 36mm. The advanced polycarbonate material provides excellent chemical resistance, a high strength-to-weight ratio, and non-conductive properties, making it suitable for environments where electrical insulation or resistance to corrosive agents is paramount. Designed for moderate load capacities and high rotational speeds, it ensures smooth, low-friction operation in demanding power transmission duties. Its dimensional stability under varying thermal conditions further enhances its reliability.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the housing bore and shaft are clean and free from debris. Inspect for any surface imperfections. 2. Carefully press the bearing into the housing or onto the shaft, ensuring it is seated squarely and without tilting. Apply force evenly to the outer or inner ring, respectively. 3. Verify that the bearing rotates freely after installation. Check for any signs of binding or excessive noise.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying excessive force or uneven pressure during installation, leading to brinelling or deformation of the raceways. | Use a proper bearing press or a clean, flat surface to apply force evenly to the correct ring (outer ring for housing, inner ring for shaft). |
| Contaminating the bearing during installation, which can significantly reduce its lifespan and performance. | Handle the bearing with clean hands or gloves and install it in a clean environment. Keep packaging on until immediately before installation. |
A: This Deep Groove Ball Bearing is manufactured from Polycarbonate.
A: Lightweight pulley systems, Corrosion-resistant conveyor equipment, Electrical insulation applications in machinery.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||