This deep groove ball bearing, constructed from high-grade polycarbonate, offers exceptional performance in demanding applications. Its precise dimensions ensure smooth, low-friction rotation for efficient power transmission.
| Standard | DIN 933 |
| Material | Polycarbonate |
| Finish | Passivated |
| Grade | N/A |
| Inside Diameter | 23mm |
| Outside Diameter | 41mm |
| Width | 17mm |
A high-performance industrial component, this deep groove ball bearing is engineered for reliability and efficiency. Featuring an inside diameter of 23mm, an outside diameter of 41mm, and a width of 17mm, it provides robust load-bearing capabilities. The advanced polycarbonate material delivers excellent corrosion resistance, lightweight properties, and superior dielectric strength, making it ideal for applications where traditional steel bearings may fail due to environmental factors or electrical conductivity requirements. Its design minimizes friction and heat generation, ensuring consistent performance under high rotational speeds and moderate radial and axial loads.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the bearing seating is clean and free from debris. 2. Carefully press the bearing into the housing or onto the shaft, applying even pressure. 3. Verify smooth rotation and proper seating before applying load.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening during press-fit installation, leading to deformation. | Use a controlled press-fit with appropriate tooling to avoid excessive force and potential damage to the polycarbonate structure. |
| Introducing contaminants during handling and installation. | Handle the bearing in a clean environment and use clean tools to prevent grit or debris from entering the raceways. |
A: This Deep Groove Ball Bearing is manufactured from Polycarbonate.
A: Automated manufacturing equipment, Material handling systems, Medical device components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||