This polycarbonate deep groove ball bearing offers a lightweight, non-conductive solution for moderate loads. Its precise dimensions ensure smooth rotational performance in a variety of low-friction applications.
| Standard | ASME B18 |
| Material | Polycarbonate |
| Finish | Plain |
| Grade | N/A |
| Inside Diameter | 16mm |
| Outside Diameter | 190mm |
| Width | 24mm |
Specified by design engineers worldwide, this deep groove ball bearing features a 16mm inside diameter, a 190mm outside diameter, and a 24mm width. Constructed from high-performance polycarbonate, it exhibits excellent resistance to many chemicals and is non-magnetic, making it suitable for sensitive environments. The inherent electrical insulation properties of polycarbonate prevent galvanic corrosion. Its operating temperature range is typically between -20°C and +80°C, and it's designed for low axial and radial load conditions.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure bearing housing and shaft are clean and free of debris. 2. Carefully align the bearing with the shaft and gently press or tap it into place, ensuring even pressure. 3. Secure the bearing using appropriate retaining mechanisms (e.g., snap rings, housings) as per system design.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying excessive force during press-fitting, potentially damaging the polycarbonate structure. | Use a bearing press or controlled tapping with a soft mallet to ensure even force distribution. |
| Exposing the bearing to temperatures outside its specified operating range, leading to material degradation or premature failure. | Verify ambient and operating temperatures of the application do not exceed the polycarbonate material's limits. |
A: This Deep Groove Ball Bearing is manufactured from Polycarbonate.
A: Light-duty conveyors, Consumer electronics, Medical equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||