This advanced deep groove ball bearing, crafted from robust polycarbonate, offers exceptional performance in power transmission. Its unique material properties provide lightweight operation and superior corrosion resistance for critical applications.
| Standard | ISO 9001 |
| Material | Polycarbonate |
| Finish | Passivated |
| Grade | N/A |
| Inside Diameter | 13mm |
| Outside Diameter | 28mm |
| Width | 22mm |
Precision-manufactured to tight tolerances, this polycarbonate deep groove ball bearing ensures optimal performance and longevity. With an inside diameter of 13mm, an outside diameter of 28mm, and a width of 22mm, it is engineered for demanding power transmission duties. The advanced polycarbonate material provides excellent chemical resistance, low friction, and non-conductive properties, making it suitable for environments where traditional steel bearings may fail or pose electrical hazards. Its inherent lightweight nature contributes to reduced system inertia and improved energy efficiency in rotating applications.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure shaft and housing surfaces are clean and free of debris. 2. Carefully press the bearing onto the shaft, applying even pressure to the inner race. 3. Secure the bearing in the housing, ensuring a snug fit without excessive force.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying force to the outer race during shaft installation. | Always apply installation force to the inner race when mounting on a shaft to prevent brinelling or damage to the raceways. |
| Overheating the polycarbonate during installation. | Avoid using excessive heat for installation, as polycarbonate can deform at elevated temperatures. Consider using a bearing press for optimal results. |
A: This Deep Groove Ball Bearing is manufactured from Polycarbonate.
A: Food and Beverage Processing Equipment, Medical Devices, Corrosive Chemical Handling Systems, Lightweight Robotics.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||