Engineered for robust pipe suspension, this 4" Nylon U-Bolt offers superior corrosion resistance and non-conductive properties. Its precise dimensions ensure secure and reliable support for piping systems in demanding environments.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Passivated |
| Grade | N/A |
| Inside Width ( A) | 1.78" |
| Inside Length ( B) | 5.18" |
| Thread Size | 1/2"-13 |
Manufactured under strict quality controls, this Nylon U-Bolt is specifically designed for 4" nominal pipe diameters. It features an inside width (A) of 1.78 inches and an inside length (B) of 5.18 inches, accommodating standard pipe wall thicknesses. The bolt features a robust 1/2"-13 UNC thread size, ensuring secure fastening with compatible nuts and washers. Constructed from high-strength, UV-resistant nylon, this U-bolt exhibits excellent chemical inertness and a wide operating temperature range, making it ideal for applications where metal corrosion is a concern or electrical insulation is required.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Position the U-bolt around the 4" pipe, ensuring the curved section makes full contact. 2. Insert the threaded legs through the mounting surface or support bracket. 3. Securely fasten with appropriate nuts and washers, tightening evenly on both sides to achieve the specified tension.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening the nylon U-bolt, which can lead to material deformation or cracking. | Tighten nuts until snug, then apply an additional 1/4 to 1/2 turn. Avoid excessive force. Torque specifications should be referenced if available for the application. |
| Using the wrong size U-bolt for the pipe, leading to loose or damaged pipe. | Always verify the nominal pipe size and measure the actual pipe diameter to ensure compatibility with the U-bolt's inside dimensions (A and B). |
A: This Nylon U-Bolt, 4" Pipe is manufactured from Nylon.
A: Chemical processing plants, Wastewater treatment facilities, Marine and offshore installations, Electrical conduit support.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||