This robust Nylon U-Bolt is engineered for secure and corrosion-resistant mounting of 4" diameter piping. Its non-conductive properties and high strength make it ideal for demanding industrial and marine environments.
| Standard | ASTM A106 |
| Material | Nylon |
| Finish | Zinc Plated |
| Grade | N/A |
| Inside Width ( A) | 3.70" |
| Inside Length ( B) | 6.04" |
| Thread Size | 1/2"-13 |
Manufactured under strict quality controls, this 4" pipe Nylon U-Bolt features a nominal inside width (A) of 3.70" and an inside length (B) of 6.04". Constructed from high-grade nylon, it offers exceptional resistance to chemicals, moisture, and UV degradation, ensuring long-term performance in corrosive atmospheres. The 1/2"-13 thread size provides robust fastening capability. This U-bolt is designed for applications requiring non-metallic, non-conductive support and vibration dampening.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Position the U-bolt around the 4" pipe and the mounting surface. 2. Thread the nuts onto the U-bolt legs, ensuring even tension. 3. Tighten the nuts securely, but avoid over-tightening to prevent material deformation.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening the nuts, which can crack or deform the nylon. | Tighten nuts until snug, then apply a final quarter-turn. For critical applications, use a torque wrench set to the nylon manufacturer's recommended specification. |
| Using the wrong size U-bolt for the pipe diameter. | Verify the pipe's outer diameter and select a U-bolt with an inside width that closely matches, allowing for proper clamping without excessive stress on the nylon. |
A: This Nylon U-Bolt, 4" Pipe is manufactured from Nylon.
A: Marine piping systems, Chemical processing plants, Wastewater treatment facilities, Electrical conduit support.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||