Engineered from high-strength nylon, this U-bolt provides robust, corrosion-resistant support for 3" diameter piping. Its non-conductive properties make it ideal for sensitive environments where electrical isolation is paramount.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Zinc Plated |
| Grade | N/A |
| Inside Width ( A) | 3.99" |
| Inside Length ( B) | 7.30" |
| Thread Size | 1/2"-13 |
Precision-manufactured to tight tolerances, this Nylon U-Bolt ensures secure and reliable pipe clamping. The material, Nylon (Polyamide), offers excellent chemical resistance, high tensile strength, and a wide operating temperature range. The internal dimensions are precisely machined with an Inside Width (A) of 3.99 inches and an Inside Length (B) of 7.30 inches, specifically designed to accommodate standard 3-inch nominal pipe. The robust 1/2"-13 UNC threads provide substantial torque capabilities for secure fastening. This design guarantees optimal load distribution and minimizes potential pipe deformation under stress.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Position the U-bolt around the 3" pipe, ensuring it is centered. 2. Place the accompanying mounting plate or bracket against the pipe and through the U-bolt's legs. 3. Secure the U-bolt by tightening the nuts onto the threaded legs, applying even pressure.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening the nuts, which can strip the nylon threads or deform the pipe. | Use a torque wrench set to the manufacturer's recommended torque specification for nylon fasteners, or tighten until snug and the pipe is firmly held without excessive compression. |
| Using excessive force during installation, potentially damaging the U-bolt or pipe. | Apply steady, controlled pressure during tightening. The nylon material is strong but can be susceptible to impact damage. |
A: This Nylon U-Bolt, 3" Pipe is manufactured from Nylon.
A: Plumbing and HVAC pipe support, Electrical conduit securing, Marine and chemical processing equipment support.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||