This robust Nylon U-Bolt is engineered for secure pipe support in corrosive environments. Its precise dimensions ensure a tight fit for 3" pipes, offering excellent resistance to chemicals and moisture.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Black Oxide |
| Grade | N/A |
| Inside Width ( A) | 1.07" |
| Inside Length ( B) | 5.26" |
| Thread Size | 1/2"-13 |
Engineered for reliability and performance, this U-bolt is constructed from high-strength nylon, providing superior corrosion resistance compared to metal alternatives, making it ideal for chemical processing, marine, and wastewater applications. The 1.07" inside width (A) and 5.26" inside length (B) are precisely machined to accommodate standard 3" nominal pipe. The 1/2"-13 UNC threads ensure secure fastening with compatible nuts and washers, offering a substantial clamping force while maintaining the material's inherent dielectric properties.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Position the U-bolt around the 3" pipe, ensuring it rests against the mounting surface. 2. Thread the 1/2"-13 nuts onto the U-bolt legs, tightening them evenly. 3. Periodically re-check nut tension for optimal pipe support, especially in vibrating environments.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening the nuts, which can deform the nylon or damage the threads. | Tighten nuts to a snug fit, then an additional quarter to half turn. Avoid excessive force; use a torque wrench calibrated for nylon if available. |
| Using the wrong size U-bolt for the pipe diameter. | Verify the pipe's nominal size and confirm the U-bolt's inside dimensions (A and B) are appropriate for a secure, non-damaging fit. |
A: This Nylon U-Bolt, 3" Pipe is manufactured from Nylon.
A: Chemical processing pipe support, Marine and offshore installations, Wastewater and water treatment facilities, Electrical conduit securing.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||