Engineered from high-performance nylon, this 2-inch pipe U-bolt offers superior corrosion resistance and non-conductive properties. Its robust design ensures secure mounting in demanding environments.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Galvanized |
| Grade | N/A |
| Inside Width ( A) | 2.29" |
| Inside Length ( B) | 4.24" |
| Thread Size | 1/2"-13 |
Manufactured under strict quality controls, this Nylon U-Bolt is designed for reliable pipe support. Featuring an inside width (A) of 2.29 inches and an inside length (B) of 4.24 inches, it accommodates standard 2-inch nominal pipe sizes. The 1/2"-13 UNC threaded rods provide substantial clamping force. Nylon's inherent chemical resistance makes it ideal for applications involving corrosive fluids, saltwater, or harsh atmospheric conditions, while its non-conductive nature is crucial in electrical isolation scenarios.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Position the U-bolt around the pipe, ensuring it spans the designated support area. 2. Insert the threaded legs through the mounting surface or bracket. 3. Securely fasten with appropriate washers and nuts (not included), tightening evenly to achieve desired clamping force without over-compression.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening the nuts, which can deform the nylon material. | Tighten nuts gradually and evenly, using a torque wrench set to the recommended specification for nylon fasteners. |
| Using in applications exceeding the temperature or chemical resistance limits of nylon. | Verify the operating temperature range and compatibility with the specific chemicals present in the environment before installation. |
A: This Nylon U-Bolt, 2" Pipe is manufactured from Nylon.
A: Marine environments, Chemical processing plants, Wastewater treatment facilities.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||