Engineered from robust nylon, this U-bolt provides secure and corrosion-resistant support for 2" piping. Its non-conductive properties make it ideal for sensitive environments where electrical isolation is critical.
| Standard | ASTM A106 |
| Material | Nylon |
| Finish | Zinc Plated |
| Grade | N/A |
| Inside Width ( A) | 4.45" |
| Inside Length ( B) | 5.91" |
| Thread Size | 1/2"-13 |
Precision-manufactured to tight tolerances, this U-bolt is constructed from high-strength, UV-stabilized nylon. It features an inside width (A) of 4.45 inches and an inside length (B) of 5.91 inches, designed to accommodate standard 2-inch nominal pipe sizes. The integrated 1/2"-13 UNC threads ensure a reliable and secure fastening solution. Nylon's inherent resistance to corrosion, chemicals, and moisture, coupled with its excellent dielectric properties, makes this U-bolt a superior choice for demanding industrial and marine applications.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Position the U-bolt around the pipe, ensuring it rests on a suitable support. 2. Thread the nuts onto the U-bolt legs, tightening them evenly. 3. Torque the nuts to the manufacturer's recommended specification for the chosen hardware, ensuring a secure fit without over-compression.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening the nuts, which can deform the nylon and compromise its structural integrity or insulating properties. | Use a torque wrench and adhere to recommended torque values for nylon fasteners. Avoid excessive force. |
| Selecting a U-bolt with insufficient inside dimensions for the specified pipe diameter. | Always verify the pipe's actual outer diameter and compare it against the U-bolt's inside width and length specifications before installation. |
A: This Nylon U-Bolt, 2" Pipe is manufactured from Nylon.
A: Marine piping systems, Chemical processing lines, Electrical conduit support.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||