This 2" pipe Nylon U-Bolt provides superior corrosion resistance and non-conductive support. Engineered for demanding environments, it ensures secure pipe attachment without metal fatigue.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Anodized |
| Grade | N/A |
| Inside Width ( A) | 1.83" |
| Inside Length ( B) | 5.55" |
| Thread Size | 1/2"-13 |
Specified by design engineers worldwide, this Nylon U-Bolt is fabricated from high-performance polyamide for exceptional chemical resistance and dielectric strength. Its precise dimensions, featuring an inside width (A) of 1.83 inches and an inside length (B) of 5.55 inches, are optimized for a secure fit on standard 2" nominal pipe. The robust 1/2"-13 UNC thread size ensures ample load-bearing capacity for critical applications where metal fasteners are unsuitable due to corrosive elements or electrical conductivity concerns.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Position the U-bolt around the 2" pipe, ensuring snug contact. 2. Thread the nuts onto the U-bolt legs until hand-tight. 3. Tighten nuts incrementally and evenly on both sides to achieve secure pipe clamping, avoiding over-tightening that could deform the nylon.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force during tightening, leading to thread stripping or cracking of the nylon material. | Tighten nuts gradually and evenly, using a torque wrench if specified for the application, to avoid damaging the U-bolt. |
| Selecting the wrong U-bolt size for the pipe diameter, resulting in loose support or damage. | Always verify the pipe's nominal size and consult the product's inside dimensions to ensure a proper fit. |
A: This Nylon U-Bolt, 2" Pipe is manufactured from Nylon.
A: Chemical processing plants, Wastewater treatment facilities, Marine and offshore installations, Electrical conduit support, Plumbing systems in corrosive environments.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||