Engineered for reliable pipe support, this 4" Nylon U-Bolt offers excellent corrosion resistance and vibration dampening properties. Its robust nylon construction ensures longevity in demanding industrial environments.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Galvanized |
| Grade | N/A |
| Inside Width ( A) | 2.86" |
| Inside Length ( B) | 2.04" |
| Thread Size | 1/2"-13 |
Trusted by engineers across multiple sectors, this 4" Nylon U-Bolt is manufactured from high-strength, chemical-resistant nylon. Featuring an inside width (A) of 2.86 inches and an inside length (B) of 2.04 inches, it accommodates standard 4-inch nominal pipe sizes. The 1/2"-13 thread size ensures secure fastening with compatible hardware. Ideal for applications requiring electrical isolation, noise reduction, and protection against environmental degradation.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Position the U-bolt around the 4" pipe, ensuring proper alignment with mounting surface. 2. Thread the nuts onto the U-bolt legs, applying even pressure to both sides. 3. Tighten nuts to the specified torque, ensuring a secure and stable fit without over-tightening.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening the nuts, which can deform the nylon and reduce its effectiveness or structural integrity. | Use a torque wrench to tighten the nuts to the manufacturer's recommended specification for nylon fasteners. |
| Selecting the incorrect U-bolt size for the pipe diameter, leading to loose fit or damage. | Always verify the nominal pipe size and confirm the inside width (A) of the U-bolt matches or is slightly larger than the pipe's outer diameter. |
A: This Nylon U-Bolt, 4" Pipe is manufactured from Nylon.
A: Plumbing and Piping Systems, Electrical Conduit Support, Marine and Offshore Structures.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||