Engineered for superior corrosion resistance, this 3" Nylon U-Bolt is constructed from high-strength nylon, ensuring longevity in demanding environments. Its precise dimensions and durable material make it a reliable choice for securing piping systems.
| Standard | ASTM A106 |
| Material | Nylon |
| Finish | Black Oxide |
| Grade | N/A |
| Inside Width ( A) | 1.13" |
| Inside Length ( B) | 3.63" |
| Thread Size | 1/2"-13 |
Specified by design engineers worldwide, this 3" Nylon U-Bolt features an inside width (A) of 1.13 inches and an inside length (B) of 3.63 inches. The robust 1/2"-13 thread size provides secure fastening. Manufactured from high-performance nylon, it exhibits excellent tensile strength, chemical resistance to a wide range of corrosive agents (acids, alkalis, solvents), and a broad operating temperature range. Its non-conductive properties also make it suitable for electrical isolation applications.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Position the U-bolt around the 3" pipe, ensuring it straddles the pipe evenly. 2. Insert the threaded ends through the mounting surface or bracket. 3. Securely fasten using the provided nuts and washers (sold separately), tightening to a snug fit without overtightening to prevent material deformation.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening nuts, causing stress cracking in the nylon. | Tighten nuts to a snug fit and then an additional 1/4 to 1/2 turn. Avoid using impact wrenches. |
| Using the incorrect size U-bolt for the pipe diameter. | Always verify the pipe's outer diameter and compare it to the U-bolt's inside dimensions before installation. |
A: This Nylon U-Bolt, 3" Pipe is manufactured from Nylon.
A: Plumbing and HVAC pipe support, Marine and offshore installations, Chemical processing equipment, Electrical conduit support.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||