This robust Nylon U-Bolt is engineered for secure clamping of 3-inch diameter pipes. Its non-conductive and corrosion-resistant properties make it a superior choice for demanding environments.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Galvanized |
| Grade | N/A |
| Inside Width ( A) | 4.49" |
| Inside Length ( B) | 2.29" |
| Thread Size | 1/2"-13 |
Specified by design engineers worldwide, this Nylon U-Bolt offers exceptional performance in applications requiring chemical resistance and electrical insulation. Constructed from high-strength, UV-stabilized nylon, it provides a durable and maintenance-free solution for securing conduits and piping systems. The precise dimensions, with an Inside Width (A) of 4.49 inches and an Inside Length (B) of 2.29 inches, ensure a secure fit for standard 3-inch nominal pipe sizes. The 1/2"-13 UNC thread size accommodates standard nuts and washers for a reliable and secure installation, resisting vibration and environmental degradation.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Position the U-bolt around the pipe and through the mounting surface or bracket. 2. Thread the appropriate nuts onto the U-bolt threads, ensuring even engagement. 3. Tighten the nuts progressively and evenly to achieve secure pipe support without overtightening.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force during tightening, which can damage the nylon material. | Tighten nuts until snug, then an additional 1/4 to 1/2 turn, or as specified by application load requirements, to avoid material stress. |
| Not verifying the correct U-bolt size for the specific pipe diameter. | Always measure the outside diameter of the pipe and compare it to the U-bolt's inside dimensions to ensure a proper fit. |
A: This Nylon U-Bolt, 3" Pipe is manufactured from Nylon.
A: Plumbing and HVAC pipe support in corrosive environments, Electrical conduit and cable tray securing, Marine and offshore installations.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||