Engineered from robust nylon, this U-bolt provides secure and non-conductive fastening for 3" diameter pipes. Its corrosion-resistant properties make it ideal for demanding industrial and marine applications.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Galvanized |
| Grade | N/A |
| Inside Width ( A) | 2.67" |
| Inside Length ( B) | 7.63" |
| Thread Size | 1/2"-13 |
Manufactured under strict quality controls, this Nylon U-Bolt is designed for 3" nominal pipe size. It features an inside width (A) of 2.67 inches and an inside length (B) of 7.63 inches, accommodating standard pipe OD. The 1/2"-13 UNC thread size ensures robust mechanical connection. The high-strength nylon material offers excellent resistance to a wide range of chemicals, UV radiation, and galvanic corrosion, making it a superior choice over metal alternatives in aggressive environments. Its non-conductive nature also provides electrical isolation.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Position the U-bolt around the 3" pipe, ensuring the pipe sits squarely within the curved sections. 2. Thread the nuts onto the bolt ends, tightening them evenly on both sides to secure the pipe. 3. Perform a final torque check to ensure a firm, but not over-tightened, grip, preventing pipe deformation.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening the nuts, which can deform the nylon or the pipe. | Tighten nuts evenly and to the manufacturer's recommended torque specification for nylon hardware, typically lower than metal. |
| Selecting the wrong U-bolt size for the pipe's actual outer diameter. | Always verify the pipe's outer diameter and compare it to the U-bolt's inside width (A) and length (B) specifications. |
A: This Nylon U-Bolt, 3" Pipe is manufactured from Nylon.
A: Marine pipe and conduit support, Chemical processing equipment, Plumbing and irrigation systems in corrosive soils.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||