Engineered for robust pipe support, this 3" Nylon U-Bolt offers superior corrosion resistance and electrical insulation. Its precise dimensions ensure a secure, vibration-dampening fit for critical applications.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Anodized |
| Grade | N/A |
| Inside Width ( A) | 1.96" |
| Inside Length ( B) | 4.18" |
| Thread Size | 1/2"-13 |
Precision-manufactured to tight tolerances, this Nylon U-Bolt is designed for 3-inch nominal pipe diameter applications. It features an inside width (A) of 1.96 inches and an inside length (B) of 4.18 inches, accommodating standard pipe O.D. The 1/2"-13 UNC thread size ensures compatibility with standard nuts and washers. Crafted from high-strength, UV-stabilized nylon, it exhibits excellent chemical resistance to many common industrial fluids and provides a non-conductive mounting solution, crucial for preventing galvanic corrosion and electrical current transfer. This makes it an ideal choice for marine, chemical processing, and water treatment environments where durability and environmental resistance are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Position the U-bolt around the 3" pipe, ensuring it sits snugly against the surface. 2. Insert the threaded legs through the mounting holes of the appropriate bracket or plate. 3. Securely fasten using 1/2"-13 nuts and washers, tightening evenly on both sides to the specified torque, if applicable.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening the nuts, which can deform the nylon and compromise its structural integrity. | Tighten nuts until snug, then an additional 1/4 to 1/2 turn. Consult a torque chart for nylon fasteners if precise torque is required. |
| Using a steel U-bolt in a corrosive environment, leading to premature failure. | Always select nylon or other corrosion-resistant materials when the application involves exposure to chemicals, saltwater, or other corrosive agents. |
A: This Nylon U-Bolt, 3" Pipe is manufactured from Nylon.
A: Plumbing and piping support in corrosive environments, Electrical conduit and cable tray mounting, Marine and offshore structural support.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||