Engineered from robust nylon, this 3" pipe U-bolt offers superior corrosion resistance and electrical insulation. With a 1/2"-13 thread, it ensures secure and reliable fastening in demanding environments.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Passivated |
| Grade | N/A |
| Inside Width ( A) | 1.14" |
| Inside Length ( B) | 7.49" |
| Thread Size | 1/2"-13 |
Manufactured under strict quality controls, this Nylon U-Bolt is designed for 3" nominal pipe size applications. It features an inside width (A) of 1.14 inches and an inside length (B) of 7.49 inches, accommodating a 1/2"-13 thread size. The high-performance nylon material provides excellent resistance to a wide range of chemicals, solvents, and UV degradation, making it ideal for marine, chemical processing, and outdoor installations where corrosion is a concern. Its non-conductive properties also offer electrical isolation benefits, preventing galvanic corrosion and ensuring safety in sensitive electrical applications.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the pipe is clean and free of debris. 2. Position the U-bolt around the pipe, aligning the threaded ends with the mounting surface. 3. Secure the U-bolt by tightening the nuts evenly on both sides, ensuring a snug fit without overtightening.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening the nuts, which can stress and crack the nylon material. | Tighten the nuts until snug, then apply an additional quarter to half turn. Avoid excessive force. |
| Using the incorrect U-bolt size for the pipe diameter. | Always verify the pipe's nominal size and the U-bolt's inside dimensions (A and B) to ensure a proper fit. |
A: This Nylon U-Bolt, 3" Pipe is manufactured from Nylon.
A: Marine pipe support, Chemical processing equipment, Electrical conduit fastening.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||