Engineered from high-performance nylon, this U-bolt provides a robust and corrosion-resistant solution for securing 3" pipes. Its non-conductive nature and excellent chemical resilience make it ideal for demanding industrial applications.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Passivated |
| Grade | N/A |
| Inside Width ( A) | 1.52" |
| Inside Length ( B) | 7.80" |
| Thread Size | 1/2"-13 |
Built to exacting engineering tolerances, this 3" pipe U-bolt features an inside width (A) of 1.52 inches and an inside length (B) of 7.80 inches. Constructed from high-strength, UV-stabilized nylon, it offers exceptional resistance to a wide range of chemicals, solvents, and environmental factors, including moisture and salt spray. The 1/2"-13 thread size ensures secure fastening. Ideal for applications where metallic corrosion is a concern or electrical insulation is required. Its non-marring properties protect pipe surfaces.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Position the U-bolt around the 3" pipe, ensuring proper alignment with mounting surfaces. 2. Thread the nuts onto the U-bolt legs until snug, applying even pressure. 3. Tighten the nuts to the recommended torque specification for nylon fasteners, avoiding overtightening to prevent material deformation.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening nuts, leading to cracking or deformation of the nylon material. | Use a torque wrench set to the manufacturer's recommended torque for nylon fasteners and tighten evenly on both legs. |
| Using in applications exceeding the material's temperature or load-bearing limits. | Consult the material's chemical and temperature resistance charts and ensure the application does not surpass specified load capacities. |
A: This Nylon U-Bolt, 3" Pipe is manufactured from Nylon.
A: Plumbing in corrosive environments (chemical plants, wastewater treatment), Marine applications requiring salt-water resistance, Electrical conduit support where non-conductivity is essential.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||