This robust Nylon U-Bolt is engineered for secure and reliable support of 2" diameter piping. Its non-conductive, corrosion-resistant properties make it ideal for demanding industrial environments where metal fasteners are unsuitable.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Black Oxide |
| Grade | N/A |
| Inside Width ( A) | 1.21" |
| Inside Length ( B) | 5.19" |
| Thread Size | 1/2"-13 |
Engineered for reliability and performance, this 2" pipe Nylon U-Bolt offers superior resistance to chemicals, moisture, and extreme temperatures. The precisely manufactured dimensions, with an Inside Width (A) of 1.21" and an Inside Length (B) of 5.19", ensure a snug and secure fit around standard 2" nominal pipes. The robust 1/2"-13 UNC thread size provides ample strength for secure fastening with compatible nuts and washers. This material is chosen for its excellent dielectric properties and non-galling characteristics, preventing damage to the pipe surface and eliminating galvanic corrosion concerns.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Position the U-bolt around the 2" pipe, ensuring it sits squarely on the pipe's outer surface. 2. Thread the nuts onto the U-bolt studs, hand-tightening initially to ensure proper alignment and seating. 3. Tighten the nuts using appropriate tools, alternating between nuts to apply even pressure, until the desired tension is achieved, avoiding over-tightening.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening the nuts, which can deform the nylon material and compromise its structural integrity. | Tighten nuts incrementally and alternately, using torque specifications if available, and avoid excessive force. |
| Using the wrong size U-bolt for the pipe diameter, leading to a loose or damaged installation. | Always verify the pipe's nominal diameter and ensure the U-bolt's inside dimensions are appropriate for a secure fit. |
A: This Nylon U-Bolt, 2" Pipe is manufactured from Nylon.
A: Chemical processing piping, Water and wastewater treatment systems, Marine and offshore applications, Electrical conduit support.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||