This robust Nylon U-Bolt is engineered for secure and corrosion-resistant support of 2" diameter pipes. Its precise dimensions and durable nylon construction ensure long-term performance in demanding environments.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Black Oxide |
| Grade | N/A |
| Inside Width ( A) | 1.06" |
| Inside Length ( B) | 6.66" |
| Thread Size | 1/2"-13 |
Specified by design engineers worldwide, this Nylon U-Bolt is manufactured from high-strength, chemically inert nylon for superior corrosion resistance and electrical insulation. The U-bolt features an inside width (A) of 1.06 inches and an inside length (B) of 6.66 inches, perfectly accommodating standard 2-inch nominal pipe sizes. It is equipped with robust 1/2"-13 UNC threads, ensuring secure fastening and reliable load-bearing capacity for a variety of industrial and commercial applications where metal corrosion or electrical conductivity is a concern.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Position the U-bolt around the 2" pipe, ensuring it is centered. 2. Place the pipe and U-bolt assembly against the mounting surface or support structure. 3. Secure the U-bolt by tightening the 1/2"-13 nuts onto the threaded legs until the pipe is held firmly but not excessively compressed.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening the nuts | Tighten nuts until snug and the pipe is securely held, avoiding excessive force that could deform or damage the nylon. |
| Using for loads exceeding nylon's tensile strength | Verify the application's load requirements against the U-bolt's rated capacity to prevent structural failure. |
A: This Nylon U-Bolt, 2" Pipe is manufactured from Nylon.
A: Plumbing and piping systems, Electrical conduit support, Marine and offshore installations.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||