Engineered from high-performance nylon, this U-bolt provides robust and corrosion-resistant support for 2" piping. Its non-conductive properties make it ideal for sensitive applications.
| Standard | ASTM A106 |
| Material | Nylon |
| Finish | Anodized |
| Grade | N/A |
| Inside Width ( A) | 1.54" |
| Inside Length ( B) | 4.27" |
| Thread Size | 1/2"-13 |
Built to exacting engineering tolerances, this 2" pipe U-bolt is manufactured from industrial-grade nylon, offering exceptional resistance to a wide range of chemicals, saltwater, and environmental degradation. The material's inherent dielectric strength provides crucial electrical insulation, preventing galvanic corrosion and ensuring safety in conductive environments. Precisely machined dimensions, with an inside width (A) of 1.54" and an inside length (B) of 4.27", guarantee a secure and stable fit for standard 2" nominal pipes. The 1/2"-13 thread size ensures compatibility with standard mounting hardware and allows for reliable load-bearing capabilities.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Position the U-bolt around the 2" pipe, ensuring snug contact. 2. Insert the threaded legs through the mounting surface or bracket. 3. Securely fasten with appropriate washers and nuts, tightening evenly on both sides.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening nuts, which can damage the nylon threads or compromise the bolt's structural integrity. | Tighten nuts to the recommended torque specification, ensuring a firm but not excessive grip. Use a torque wrench for accuracy. |
| Using metal washers directly against the nylon, which can cause abrasion or stress concentration. | Utilize nylon or neoprene washers between the nut and the U-bolt to distribute pressure and protect the nylon surface. |
A: This Nylon U-Bolt, 2" Pipe is manufactured from Nylon.
A: Marine environments, Chemical processing plants, Electrical conduit support, Plumbing and HVAC systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||