Engineered for reliable pipe support, this 1" Nylon U-Bolt offers superior corrosion resistance and electrical insulation. Its robust design ensures secure mounting for various industrial applications.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Galvanized |
| Grade | N/A |
| Inside Width ( A) | 2.00" |
| Inside Length ( B) | 5.18" |
| Thread Size | 1/2"-13 |
Manufactured under strict quality controls, this 1" Nylon U-Bolt is constructed from high-strength, UV-resistant nylon, ensuring exceptional durability and resistance to chemicals and corrosion. The internal dimensions are precisely machined to 2.00" (A) inside width and 5.18" (B) inside length, providing a secure fit for standard 1" piping. Featuring a robust 1/2"-13 thread size for reliable fastening, this U-bolt is ideal for environments where metal fasteners may degrade or pose an electrical hazard.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Position the U-bolt around the 1" pipe, ensuring it rests on a suitable mounting surface or conduit hanger. 2. Insert the threaded legs of the U-bolt through the mounting holes of your chosen bracket or surface. 3. Securely fasten the U-bolt using appropriate washers and nuts (sold separately), tightening evenly to achieve firm support without over-compression.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening the nuts, which can deform the nylon and compromise its structural integrity. | Tighten nuts until snug and the pipe is held firmly, but avoid excessive force. Periodically check for any signs of deformation. |
| Using metal washers that can abrade the nylon surface under vibration. | Utilize nylon or rubber washers between the nut and the U-bolt to distribute load and prevent abrasion. |
A: This Nylon U-Bolt, 1" Pipe is manufactured from Nylon.
A: Electrical conduit support, Plumbing and HVAC pipe securing, Marine and chemical processing environments.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||