Engineered from robust nylon, this U-bolt is designed for secure and corrosion-resistant fastening of 1" nominal pipe. Its precise dimensions and durable material ensure reliable performance in demanding environments.
| Standard | ASTM A106 |
| Material | Nylon |
| Finish | Passivated |
| Grade | N/A |
| Inside Width ( A) | 4.15" |
| Inside Length ( B) | 4.20" |
| Thread Size | 1/2"-13 |
Specified by design engineers worldwide, this 1" nominal pipe U-bolt is manufactured from high-strength, UV-stabilized nylon. The inside width (A) measures 4.15 inches, and the inside length (B) is 4.20 inches, accommodating standard 1" pipe OD. The integrated 1/2"-13 UNC threads provide robust fastening capabilities. Nylon's inherent properties, including excellent chemical resistance, electrical insulation, and a high strength-to-weight ratio, make it superior for applications where corrosion, electrolysis, and weight are critical considerations. Its non-conductive nature also offers safety benefits.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Position the U-bolt around the 1" nominal pipe, ensuring it is centered. 2. Thread the nuts onto the U-bolt legs, tightening them evenly to secure the pipe. 3. Confirm the pipe is stable and the U-bolt is properly seated against the mounting surface.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening which can damage nylon threads. | Tighten nuts until snug, then an additional quarter turn. Avoid excessive force. |
| Using for applications exceeding temperature or load limits of nylon. | Verify operating temperature and expected load against nylon's material specifications before installation. |
A: This Nylon U-Bolt, 1" Pipe is manufactured from Nylon.
A: Marine and offshore installations, Chemical processing equipment, Plumbing and conduit support in corrosive environments.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||