This 1" Nylon U-Bolt offers superior corrosion resistance and non-conductive properties. Engineered for secure pipe support, it's ideal for chemical, marine, and food-grade applications where metal fasteners are unsuitable.
| Standard | ASTM A106 |
| Material | Nylon |
| Finish | Black Oxide |
| Grade | N/A |
| Inside Width ( A) | 2.43" |
| Inside Length ( B) | 7.50" |
| Thread Size | 1/2"-13 |
Engineered for reliability and performance, this U-bolt features an inside width of 2.43 inches (A) and an inside length of 7.50 inches (B), accommodating 1-inch nominal pipe. Constructed from high-strength, UV-resistant nylon, it exhibits excellent chemical inertness and a wide operating temperature range, preventing galvanic corrosion and electrical conductivity. The 1/2"-13 UNC thread provides robust fastening capabilities, ensuring a secure and stable installation in demanding environmental conditions. Its lightweight nature simplifies handling and installation.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Position the U-bolt around the 1-inch nominal pipe, ensuring it is centered. 2. Place the mounting surface or bracket against the pipe and align the U-bolt legs with the pre-drilled holes or slots. 3. Secure the U-bolt by threading the nuts onto the legs, tightening them evenly until firm but avoid over-tightening to prevent material deformation.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening the nuts. | Tighten nuts until snug and secure, but avoid excessive force that could strip threads or crack the nylon material. |
| Using the wrong size U-bolt. | Verify the nominal pipe size and measure the actual pipe diameter to ensure a proper fit before installation. |
A: This Nylon U-Bolt, 1" Pipe is manufactured from Nylon.
A: Chemical Processing Plants, Marine and Offshore Structures, Food and Beverage Manufacturing, Wastewater Treatment Facilities, Electrical Conduit Support.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||