Engineered for demanding environments, this 2" pipe Nylon U-Bolt offers superior corrosion resistance and electrical insulation. Its robust construction ensures secure mounting for various industrial applications.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Zinc Plated |
| Grade | N/A |
| Inside Width ( A) | 1.63" |
| Inside Length ( B) | 5.51" |
| Thread Size | 1/2"-13 |
Manufactured under strict quality controls, this Nylon U-Bolt is designed for secure and reliable pipe support. The high-strength nylon material provides excellent resistance to chemicals, moisture, and UV degradation, making it ideal for corrosive or wet environments. Featuring an inside width (A) of 1.63 inches and an inside length (B) of 5.51 inches, it accommodates standard 2-inch nominal pipe sizes. The 1/2"-13 UNC thread size on the legs ensures compatibility with standard nuts and washers for a robust installation. This non-conductive material also offers electrical insulation benefits.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Select appropriate mounting surface and ensure it can bear the load. 2. Position the U-bolt around the 2" pipe and thread the legs through the mounting holes. 3. Securely fasten with the specified 1/2"-13 nuts and washers, tightening evenly on both legs.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening nylon U-bolts. | Tighten nuts until snug, then a quarter turn. Over-tightening can deform the nylon, reducing its effectiveness and potentially damaging the pipe. |
| Using the wrong size U-bolt for the pipe. | Always verify the nominal pipe size and confirm the U-bolt's inside dimensions (A and B) match or slightly exceed the pipe's outer diameter for proper fit and support. |
A: This Nylon U-Bolt, 2" Pipe is manufactured from Nylon.
A: Plumbing and HVAC pipe support, Electrical conduit mounting, Marine and offshore applications, Chemical processing equipment support.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||