This robust Nylon Stock Sheet, engineered for demanding suspending and bracing applications, offers exceptional strength and durability. Its high-performance material ensures reliable structural support and longevity in challenging environments.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.295" |
| Length | 20" |
| Width | 34" |
Engineered for reliability and performance, this Nylon Stock Sheet measures 0.295 inches in thickness, 20 inches in width, and 34 inches in length. Fabricated from high-grade nylon, it exhibits superior tensile strength, excellent impact resistance, and remarkable wear characteristics. Its inherent chemical inertness makes it suitable for use in corrosive or chemically active environments. Ideal for fabrication of custom brackets, supports, and structural components where load-bearing capacity and material resilience are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Measure and precisely cut the nylon stock sheet to the required dimensions using appropriate cutting tools. 2. Drill necessary mounting holes with a drill bit suitable for plastic, ensuring smooth edges to prevent stress concentration. 3. Securely fasten the fabricated component using appropriate fasteners, ensuring even load distribution.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive heat when cutting, leading to material degradation. | Employ sharp cutting tools and a moderate cutting speed, or use a coolant to manage heat buildup. |
| Over-tightening fasteners, causing potential cracking or deformation. | Utilize washers to distribute pressure and tighten fasteners to a snug, but not overtightened, state. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Custom Bracing Components, Support Structures, Wear Strips and Bushings.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||