This high-grade Nylon stock sheet offers exceptional durability and flexibility, specifically engineered for demanding pneumatic system components. Its precise dimensions and material integrity ensure reliable performance in various industrial environments.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.030" |
| Length | 24" |
| Width | 32" |
Built to exacting engineering tolerances, this 0.030" thick Nylon stock sheet measures 24" in length and 32" in width. Composed of high-performance Nylon 6, it exhibits excellent tensile strength, abrasion resistance, and a low coefficient of friction, making it ideal for fabricating seals, diaphragms, and wear components within pneumatic cylinders, valves, and control systems. Its inherent toughness and resistance to moisture absorption ensure consistent performance and extended service life even under high-pressure cycling and exposure to industrial lubricants and solvents.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Cut Nylon stock to required dimensions using a precision cutting tool. 2. Smooth all edges to remove burrs and ensure a clean finish. 3. Install the fabricated component according to system-specific assembly guidelines.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force during machining, leading to material stress or cracking. | Employ appropriate cutting speeds and feed rates for Nylon, utilizing sharp tooling to prevent overheating and material damage. |
| Inadequate edge finishing, resulting in premature wear or leakage. | Thoroughly deburr and chamfer all cut edges to ensure a smooth mating surface and prevent stress concentrations. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Pneumatic cylinder seals, Diaphragms for pneumatic valves, Wear strips and guides in automated systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||