This premium Nylon stock sheet offers exceptional toughness, wear resistance, and impact strength. Ideal for fabricating custom parts, wear pads, and components in demanding industrial environments.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.325" |
| Length | 33" |
| Width | 22" |
Specified by design engineers worldwide, this high-density Nylon stock sheet (0.325" thickness, 33" length, 22" width) provides superior mechanical properties. Its inherent lubricity and excellent abrasion resistance make it ideal for high-wear applications. Engineered for optimal performance in gears, bearings, wear strips, and custom tooling where dimensional stability and load-bearing capacity are critical. Exhibits good chemical resistance to oils, greases, and most solvents.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Accurately measure and mark cut lines on the Nylon stock sheet. 2. Utilize appropriate sawing equipment (e.g., bandsaw, circular saw) with a sharp, carbide-tipped blade designed for plastics. 3. Ensure secure clamping of the material to prevent vibration during cutting for precise dimensions.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using a dull blade, leading to melting and inaccurate cuts. | Employ a sharp, fine-toothed blade specifically designed for cutting Nylon or plastics. Maintain a consistent feed rate to prevent overheating. |
| Inadequate material support, causing chipping or cracking during cutting. | Use a stable cutting surface and ensure the Nylon sheet is well-supported throughout the entire cutting process to minimize stress. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Custom Machined Wear Components, Gears and Sprockets, Bushings and Bearings, Chute Liners, Rollers and Guide Strips.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||