This robust 0.838" thick Nylon stock sheet, measuring 16" x 33", is engineered for superior performance in demanding material handling environments. Its inherent toughness ensures longevity and reliability.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.838" |
| Length | 16" |
| Width | 33" |
A proven choice for industrial professionals, this Nylon stock sheet boasts exceptional toughness and impact resistance, crucial for wear-intensive applications. The material's inherent lubricity minimizes friction and wear, extending the service life of components. With precise dimensions of 0.838" thickness, 16" width, and 33" length, it is ideal for custom fabrication of wear strips, guide rails, impact pads, and chute liners where abrasion and shock loading are primary concerns.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean and prepare the mounting surface thoroughly. 2. Precisely cut the Nylon stock sheet to the required dimensions using appropriate tooling. 3. Securely fasten the sheet using appropriate mechanical fasteners or adhesives, ensuring proper alignment and tension.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect cutting tools for Nylon, leading to melting or chipping. | Employ sharp, high-speed steel or carbide tooling specifically designed for cutting plastics, ensuring adequate cooling if necessary. |
| Over-tightening fasteners, which can cause stress cracking in the Nylon. | Use washers and avoid excessive torque when fastening; allow for slight thermal expansion and contraction. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Wear Strips and Bushings, Chute Liners and Hoppers, Impact Plates and Bumpers.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||