This robust Nylon stock sheet offers exceptional durability and impact resistance. Its substantial thickness and generous dimensions make it suitable for a wide range of demanding industrial safety applications requiring superior protection.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.361" |
| Length | 17" |
| Width | 44" |
Engineered for reliability and performance, this Nylon stock sheet boasts a nominal thickness of 0.361 inches, a width of 44 inches, and a length of 17 inches. Manufactured from high-grade nylon, it exhibits excellent tensile strength, superior abrasion resistance, and good chemical inertness, making it ideal for applications requiring protection against wear, impact, and moderate corrosive environments. Its inherent toughness and dimensional stability ensure long-term performance under rigorous operational conditions.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting surface is clean, dry, and free from debris. 2. Accurately measure and cut the Nylon stock sheet to the required dimensions using appropriate cutting tools for plastics. 3. Securely fasten the sheet using suitable mechanical fasteners, ensuring even distribution of load to prevent stress concentration.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not designed for plastics, leading to chipping or cracking. | Utilize carbide-tipped blades or specialized plastic cutting tools for clean, precise cuts. |
| Over-tightening fasteners, which can cause stress fractures in the nylon. | Employ washers and tighten fasteners to a snug fit, avoiding excessive torque. Consider using captive fasteners or grommets for larger areas. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Protective guards and shields, Impact-resistant barriers, Wear pads and guides.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||