This robust Nylon stock sheet, precisely engineered at 0.584" thick, 23" long, and 44" wide, is a critical component for demanding material handling applications requiring superior durability.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.584" |
| Length | 23" |
| Width | 44" |
Specified by design engineers worldwide, this Nylon stock sheet boasts a substantial 0.584" thickness, offering exceptional load-bearing capacity and impact resistance. Its 23" x 44" dimensions provide ample material for custom fabrication of wear pads, chutes, liners, and impact surfaces in conveyor systems, hoppers, and material transfer equipment. The inherent properties of Nylon, including excellent abrasion resistance, low coefficient of friction, and resistance to chemicals, ensure extended service life and reduced maintenance in harsh industrial environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Cut the Nylon stock sheet to the required dimensions using appropriate cutting tools for plastics. 2. Prepare the substrate surface for secure bonding or mechanical fastening. 3. Fasten or adhere the cut Nylon component to the substrate, ensuring a flush and secure fit for optimal performance.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using inadequate cutting tools leading to rough edges or material stress. | Utilize specialized plastic cutting blades (e.g., carbide-tipped) and ensure proper feed rates to maintain clean cuts and structural integrity. |
| Improper fastening causing premature wear or delamination. | Employ oversized washers with mechanical fasteners to distribute load and prevent pull-through, or select appropriate industrial adhesives compatible with Nylon and the substrate. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Wear liners for chutes and hoppers, Guide rails and impact pads for conveyor systems, Custom fabrication of material handling components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||