This robust Nylon Stock Sheet is engineered for demanding industrial tasks. Its exceptional durability and wear resistance make it ideal for a wide range of abrading and polishing applications where consistent performance is paramount.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.229" |
| Length | 21" |
| Width | 33" |
Purpose-built for heavy-duty applications, this Nylon Stock Sheet boasts superior abrasion resistance and excellent mechanical strength. Measuring 0.229 inches thick, 21 inches in width, and 33 inches in length, its inherent lubricity minimizes friction and heat buildup during operation. The material's high impact strength and resistance to chemicals ensure longevity in challenging environments. Ideal for fabricating custom wear pads, guides, and protective surfaces in manufacturing, material handling, and automotive sectors.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Measure and cut the Nylon Stock Sheet to the required dimensions using appropriate cutting tools. 2. Prepare the mounting surface, ensuring it is clean and free of debris. 3. Secure the cut Nylon Stock Sheet using mechanical fasteners or suitable industrial adhesives, ensuring a flush fit.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using inadequate cutting tools that cause delamination or rough edges. | Employ sharp, high-quality cutting blades designed for plastics or thermoplastics to achieve clean, precise cuts. |
| Over-tightening fasteners, leading to stress cracks or deformation of the nylon sheet. | Use appropriate torque settings and consider using washers to distribute pressure evenly when mechanically fastening. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Custom wear pads and liners, Guide rails and bushings, Protective surfacing and shields.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||