This robust Nylon Stock Sheet provides superior mechanical strength, low friction, and excellent chemical resistance. Ideal for custom fabrication and demanding industrial environments.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.184" |
| Length | 31" |
| Width | 32" |
Engineered for reliability and performance, this Nylon Stock Sheet measures 0.184 inches in thickness, with a nominal length of 31 inches and a width of 32 inches. Manufactured from high-quality Nylon, it exhibits excellent tensile strength, impact resistance, and a low coefficient of friction, making it suitable for components requiring good wear characteristics and dimensional stability. Its inherent toughness and resistance to many oils, greases, and solvents ensure longevity in diverse operational conditions.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating surfaces are clean, dry, and free from debris. 2. Accurately cut the Nylon stock sheet to the required dimensions using appropriate cutting tools. 3. Secure the fabricated part using suitable fasteners or adhesives, ensuring proper alignment and load distribution.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect cutting tools, leading to fraying or chipping of the Nylon. | Utilize sharp, high-speed steel or carbide-tipped cutting tools specifically designed for plastics to achieve clean cuts. |
| Over-tightening fasteners, which can cause stress concentration and potential cracking. | Employ appropriate torque specifications and consider using washers to distribute pressure evenly when fastening. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Wear strips and guides, Bushings and bearings, Custom-machined components, Gears and sprockets, Protective coverings.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||