This industrial-grade Nylon stock sheet offers exceptional wear resistance, low friction, and excellent impact strength. Precisely manufactured for demanding applications, it's ideal for custom parts and high-performance components.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.305" |
| Length | 24" |
| Width | 41" |
Manufactured under strict quality controls, this Nylon stock sheet boasts a nominal thickness of 0.305 inches, with a standard sheet size of 24 inches in width by 41 inches in length. Composed of high-density Nylon 6, it exhibits superior tensile strength, excellent abrasion resistance, and good chemical inertness. Its inherent lubricity minimizes friction, making it suitable for bearing surfaces, wear pads, and guide components where durability and performance are paramount in harsh industrial environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Accurately measure and mark cutting lines on the Nylon stock sheet using a suitable marking tool. 2. Utilize a sharp, industrial-grade saw blade (e.g., carbide-tipped) designed for plastics to make clean cuts. 3. Ensure the Nylon sheet is securely supported during the cutting process to prevent vibration and chipping. Deburr edges if necessary.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using a dull or incorrect saw blade, leading to chipping or melting. | Employ a sharp, fine-toothed saw blade specifically designed for cutting plastics. Maintain a moderate cutting speed to prevent heat buildup. |
| Inadequate support of the sheet during cutting, causing instability and poor cut quality. | Ensure the Nylon sheet is firmly clamped or supported along the entire cutting path, especially near the cut line, to maintain rigidity. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Custom Machined Parts, Wear Strips and Bushings, Protective Liners and Covers.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||