This robust Nylon Stock Sheet provides superior performance in demanding abrading and polishing applications. Engineered for exceptional durability and consistent results, it's the ideal material for precision surface finishing and material removal.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.225" |
| Length | 41" |
| Width | 29" |
Built to exacting engineering tolerances, this Nylon Stock Sheet offers a nominal thickness of 0.225 inches, a generous length of 41 inches, and a width of 29 inches. Composed of high-grade nylon, it exhibits excellent wear resistance, low friction coefficient, and good impact strength, making it suitable for various industrial processes. Its uniform density and grain structure ensure predictable material removal rates and a smooth, consistent finish on a wide range of substrates, from metals to plastics.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sheet is clean and free from debris. 2. Securely fasten the sheet to your abrading or polishing equipment using appropriate methods (e.g., clamps, adhesives, mechanical fasteners). 3. Verify proper alignment and tension before initiating operation.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using a sheet with uneven tension or alignment. | Ensure the sheet is uniformly secured and taut across its entire surface to prevent inconsistent abrasion or damage. |
| Applying excessive force or pressure. | Gradually increase pressure as needed, allowing the nylon's inherent properties to perform the work effectively to avoid premature wear or material degradation. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Surface preparation for coatings, Deburring and edge finishing, Polishing of metallic and non-metallic parts.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||