This 0.324-inch thick Nylon stock sheet provides exceptional strength and wear resistance. Its robust properties make it ideal for custom fabrication in demanding material handling environments.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.324" |
| Length | 43" |
| Width | 45" |
A high-performance industrial component, this Nylon stock sheet offers superior abrasion resistance, excellent impact strength, and low coefficient of friction. Precisely manufactured to dimensions of 0.324 inches (thickness) by 43 inches (length) and 45 inches (width), it is an engineered solution for custom fabrication of wear pads, guides, chutes, and impact surfaces. Its inherent toughness and resistance to chemicals and moisture ensure long service life in rigorous material handling operations.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Measure and mark the desired dimensions on the Nylon stock sheet. 2. Utilize appropriate cutting tools (e.g., industrial saw, CNC router) for precise fabrication. 3. Secure the fabricated Nylon component to the intended application using appropriate fasteners or adhesives, ensuring proper alignment and load distribution.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect cutting tools, leading to delamination or uneven edges. | Employ carbide-tipped blades or router bits designed for plastics to ensure clean, precise cuts without material damage. |
| Overheating the material during machining, causing melting or distortion. | Utilize adequate cooling (e.g., air blast, coolant) during cutting and drilling operations to maintain material integrity. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Wear Strips and Pads, Chute Liners, Impact Plates, Custom Bushings and Bearings.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||