This robust Nylon Stock Sheet is engineered for demanding industrial environments. Its self-lubricating properties significantly reduce friction and wear, extending the service life of critical components.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.558" |
| Length | 22" |
| Width | 17" |
A high-performance industrial component, this 0.558-inch thick Nylon Stock Sheet offers exceptional wear resistance and a low coefficient of friction, making it ideal for self-lubricating applications. Manufactured from high-grade nylon, it exhibits excellent mechanical strength and chemical resistance, ensuring reliable performance under load. The generous dimensions of 22 inches in length and 17 inches in width provide ample material for custom fabrication of bushings, bearings, guides, and wear pads, minimizing material waste and optimizing cost-effectiveness for complex designs.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Measure and precisely cut the Nylon Stock Sheet to the required dimensions using appropriate industrial cutting tools. 2. Carefully deburr all cut edges to ensure a smooth finish and prevent premature wear on mating surfaces. 3. Securely fasten the fabricated nylon component to its intended location using appropriate fasteners, ensuring proper alignment and load distribution.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using a standard cutting tool not designed for nylon, leading to melting or chipping. | Employ a sharp, high-speed saw with a fine-tooth blade specifically designed for cutting plastics to achieve clean, precise cuts. |
| Over-tightening fasteners, which can cause the nylon to deform or crack. | Use washers and torque fasteners to the manufacturer's recommended specifications for nylon, allowing for slight expansion and contraction. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Self-lubricating bushings and bearings, Wear strips and guide rails, Machine components requiring low friction.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||