This robust Nylon stock sheet offers exceptional durability and wear resistance. Precisely manufactured to industrial standards, it's ideal for custom fabrication and demanding operational environments.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.710" |
| Length | 21" |
| Width | 38" |
A proven choice for industrial professionals, this Nylon stock sheet exhibits superior mechanical properties including excellent tensile strength, high impact resistance, and low coefficient of friction. Its substantial 0.710-inch thickness, combined with dimensions of 21 inches by 38 inches, makes it suitable for fabricating robust components. The material's inherent toughness and resistance to abrasion ensure longevity in high-stress applications.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Measure and mark cut lines precisely on the nylon stock sheet. 2. Use a suitable saw (e.g., band saw, circular saw with appropriate blade) to make clean cuts. 3. Deburr edges to ensure a smooth finish and prevent snagging.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using an incorrect saw blade for nylon, leading to melting or chipping. | Utilize a carbide-tipped blade designed for plastics or use a standard wood blade with a finer tooth count at a slower feed rate. |
| Applying excessive force during cutting, causing stress fractures. | Allow the saw to do the work; maintain a consistent, moderate feed rate to prevent overheating and splintering. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Wear strips and guides, Custom jigs and fixtures, Protective coverings.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||