High-performance nylon stock sheet, precisely engineered for demanding industrial applications. Offers superior wear resistance, impact strength, and chemical inertness for reliable fabrication of critical components.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.228" |
| Length | 34" |
| Width | 14" |
Trusted by engineers across multiple sectors, this industrial-grade nylon stock sheet boasts a robust 0.228" thickness, measuring a generous 34" in length and 14" in width. Fabricated from high-density nylon, it exhibits exceptional tensile strength, low coefficient of friction, and excellent resistance to abrasion and impact. Its non-conductive properties and broad chemical compatibility make it an ideal material for fabricating machine parts, wear pads, bushings, and custom fixtures in environments ranging from manufacturing plants to laboratories.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean the substrate thoroughly to remove all debris and contaminants. 2. Precisely cut the nylon sheet to the required dimensions using appropriate cutting tools. 3. Secure the fabricated component using suitable fasteners or adhesives, ensuring proper alignment and load distribution.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard utility knives for cutting thicker nylon sheets. | Employ industrial-grade saws (e.g., band saw, table saw) with fine-tooth blades specifically designed for plastics to ensure clean, precise cuts and prevent chipping. |
| Over-tightening fasteners, leading to material stress and potential cracking. | Utilize washers and torque appropriate for nylon's properties to distribute stress evenly and prevent localized pressure points that could compromise structural integrity. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Machine component fabrication, Wear pads and guides, Bushings and bearings.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||