This premium Nylon stock sheet, precision manufactured to stringent specifications, delivers exceptional electrical insulation and mechanical strength. Ideal for custom fabrication in demanding electrical and lighting environments.
| Standard | ASTM A106 |
| Material | Nylon |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.639" |
| Length | 33" |
| Width | 19" |
Built to exacting engineering tolerances, this 0.639-inch thick Nylon stock sheet measures 33 inches in length and 19 inches in width. Nylon's inherent dielectric strength, high tensile strength, and resistance to abrasion make it an optimal material for insulating components, structural supports, and protective barriers within electrical enclosures and lighting fixtures. Its robust chemical resistance further ensures longevity in environments exposed to common industrial solvents and oils. This material's machinability allows for precise shaping and fitting to meet complex design requirements.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Cut the Nylon stock sheet to the required dimensions using appropriate industrial cutting tools. 2. Machine or drill mounting holes as per design specifications. 3. Securely install the fabricated Nylon component into the electrical or lighting assembly using fasteners suitable for Nylon.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using improper cutting tools leading to delamination or chipping. | Utilize sharp, carbide-tipped blades designed for plastic machining to ensure clean cuts. |
| Over-tightening fasteners, which can cause cracking or deformation of the Nylon. | Employ washers to distribute load and tighten fasteners only until snug, avoiding excessive torque. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Electrical insulation barriers, Custom electrical enclosures, Lighting fixture components, Terminal blocks and standoffs, Protective guards for electrical equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||