This high-performance Nylon stock sheet is engineered for demanding industrial applications. Its superior strength, wear resistance, and impact absorption make it the ideal material for fabricating custom components and protective elements.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.181" |
| Length | 30" |
| Width | 19" |
Specified by design engineers worldwide, this Nylon stock sheet offers exceptional mechanical properties for precision applications. With a precise thickness of 0.181 inches, a generous length of 30 inches, and a width of 19 inches, it provides ample material for complex machining and fabrication. The inherent toughness, excellent abrasion resistance, and low coefficient of friction of this industrial-grade nylon ensure durable performance in high-stress environments, from wear pads to custom tooling.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Accurately measure and mark the desired dimensions on the nylon stock sheet. 2. Utilize appropriate cutting tools (e.g., bandsaw, router with a suitable bit) to cut the material to size. 3. Smooth all cut edges with sandpaper or a deburring tool to remove sharp points.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not designed for plastics, leading to melting or chipping. | Employ specialized plastic cutting blades or bits with appropriate feed rates and cooling to prevent heat buildup and ensure clean cuts. |
| Overheating the material during machining, causing deformation or degradation. | Maintain moderate cutting speeds and use coolant or air blast to dissipate heat effectively. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Custom Machined Parts, Wear Plates and Bushings, Protective Guards and Covers.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||